IAC AcousticsThailand · since 2009

BB460

BlastVib BB460 sound damping

แผ่นลดเสียง BlastVib BB460

Roll of BlastVib BB460 damping sheet, partly unrolled, with its embossed gold aluminium face

BlastBlock is a brand of BlastBlock BV, the Netherlands, which owns the trademark and the product specification. IAC Acoustics (Thailand) Co., Ltd. is the reseller of BlastBlock in Thailand.

About BB460: built for vibration damping

BlastBlock BB460 BlastVib is a self-adhesive vibration damping sheet made of 2 mm black butyl rubber with an aluminium foil face. It weighs approximately 3.86 kg/m² and comes in rolls of 500 × 10,000 mm, covering 5 m².

฿8,688

incl. VAT · ฿8,120 excl. VAT

In stock in Bangkok · If you collect, it is ready within 1 working day of cleared payment. If we deliver, you will typically have it in 3–5 working days.
Free delivery nationwide on orders over ฿20,000 excl. VAT

Its job: stopping thin panels from resonating

BB460 is designed to stop thin panels from resonating: sheet metal, ducts, hoppers, machine guards and covers, acoustic enclosure panels, and vehicle body panels.

When these panels are excited by machinery, airflow, impacts or road vibration, they can resonate and radiate noise from their whole surface, heard as rattling sheet metal, a low boom or drumming.

BB460 works as constrained-layer damping. When the panel flexes, the butyl rubber is sheared between the panel and the aluminium foil, so the vibration energy is dissipated inside the butyl instead of being radiated as sound. This reduces drumming, booming and rattling.

How it works with other materials

BB460 reduces the structure-borne vibration of the panel it is bonded to.

It is not a mass loaded vinyl (MLV) barrier, however, and cannot replace MLV where the aim is to stop airborne sound passing through a wall, a floor or an enclosure.

The usual approach is to use the two together:

  • BB460: on the resonating panel, to damp structural vibration.
  • BB830 or BB830LF: where airborne sound must be stopped from passing through the construction.

Installation

Installation is straightforward: peel, press and finish. The steps are:

  1. Clean and degrease the surface.
  2. Cut the sheet to size.
  3. Peel off the release liner.
  4. Press the sheet firmly onto the surface, using a roller so the butyl makes full contact with the metal.

At only 2 mm thick it follows curved or corrugated surfaces and adds very little build-up, which suits door cavities, under floor carpets and machine guards.

Planning weight and coverage

Weight is easy to plan: approximately 3.86 kg per square metre.

Apply BB460 only to the panels that actually resonate, such as duct walls, hopper sides, machine guards, door panels and vehicle floor pans, so the added weight stays proportionate to the problem being solved.

Want a sample first?

Free A4 samples are for companies and projects. Private customers can order the trial kit (2 m² of MLV with adhesive and sealant) to test a real installation.

Request a sample or a quotation